- Click Here For More Specific Information On:
- Commercial Property Management Software
Submitted by: Henry Kay
Question: 1
A network administrator needs to implement a service that enables granular control of IOS commands that can be executed. Which AAA authentication method should be selected?
A. TACACS+
B. RADIUS
C. Windows Active Directory
D. Generic LDAP
Answer: A
Question: 2
An administrator can leverage which attribute to assign privileges based on Microsoft Active Directory user groups?
A. member of
B. group
C. class
D. person
Answer: A
Question: 3
Cisco 802.1X phasing enables flexible deployments through the use of open, low-impact, and closed modes. What is a unique characteristic of the most secure mode?
A. Granular ACLs applied prior to authentication
B. Per user dACLs applied after successful authentication
C. Only EAPoL traffic allowed prior to authentication
D. Adjustable 802.1X timers to enable successful authentication
Answer: C
Question: 4
A network administrator must enable which protocol extension to utilize EAP-Chaining?
A. EAP-FAST
B. EAP-TLS
C. MSCHAPv2
D. PEAP
Answer: A
Question: 5
In the command ‘aaa authentication default group tacacs local’, how is the word ‘default’ defined?
A. Command set
B. Group name
C. Method list
D. Login type
Answer: C
Question: 6
Changes were made to the ISE server while troubleshooting, and now all wireless certificate authentications are failing. Logs indicate an EAP failure. What is the most likely cause of the problem?
A. EAP-TLS is not checked in the Allowed Protocols list
B. Certificate authentication profile is not configured in the Identity Store
C. MS-CHAPv2-is not checked in the Allowed Protocols list
D. Default rule denies all traffic
E. Client root certificate is not included in the Certificate Store
Answer: A
Question: 7
The NAC Agent uses which port and protocol to send discovery packets to an ISE Policy Service Node?
A. tcp/8905
B. udp/8905
C. http/80
D. https/443
Answer: B
Question: 8
Which two conditions are valid when configuring ISE for posturing? (Choose two.)
A. Dictionary
B. member Of
C. Profile status
D. File
E. Service
Answer: D,E
Question: 9
Refer to the exhibit.
Which three statements about the given configuration are true? (Choose three.)
A. TACACS+ authentication configuration is complete.
B. TACACS+ authentication configuration is incomplete.
C. TACACS+ server hosts are configured correctly.
D. TACACS+ server hosts are misconfigured.
E. The TACACS+ server key is encrypted.
F. The TACACS+ server key is unencrypted.
Answer: B,C,F
Question: 10
In AAA, what function does authentication perform?
A. It identifies the actions that the user can perform on the device.
B. It identifies the user who is trying to access a device.
C. It identifies the actions that a user has previously taken.
D. It identifies what the user can access.
Answer: B
Question: 11
Which identity store option allows you to modify the directory services that run on TCP/IP?
A. Lightweight Directory Access Protocol
B. RSA SecurID serve
C. RADIUS
D. Active Directory
Answer: A
Question: 12
Which term describes a software application that seeks connectivity to the network via a network access device?
A. authenticato
B. serve
C. supplicant
D. WLC
Answer: C
Question: 13
Cisco ISE distributed deployments support which three features? (Choose three.)
A. global implementation of the profiler service CoA
B. global implementation of the profiler service in Cisco ISE
C. configuration to send system logs to the appropriate profiler node
D. node-specific probe configuration
E. server-specific probe configuration
F. NetFlow probes
Answer: A,C,D
Question: 14
How frequently does the Profiled Endpoints dashlet refresh data?
A. every 30 seconds
B. every 60 seconds
C. every 2 minutes
D. every 5 minutes
Answer: B
Question: 15
Which command in the My Devices Portal can restore a previously lost device to the network?
A. Reset
B. Found
C. Reinstate
D. Request
Answer: C
Question: 16
What is the first step that occurs when provisioning a wired device in a BYOD scenario?
A. The smart hub detects that the physically connected endpoint requires configuration and must use MAB to authenticate.
B. The URL redirects to the Cisco ISE Guest Provisioning portal.
C. Cisco ISE authenticates the user and deploys the SPW package.
D. The device user attempts to access a network URL.
Answer: A
Question: 17
Which three features should be enabled as best practices for MAB? (Choose three.)
A. MD5
B. IP source guard
C. DHCP snooping
D. storm control
E. DAI
F. URPF
Answer: B,C,E
Question: 18
When MAB is configured, how often are ports reauthenticated by default?
A. every 60 seconds
B. every 90 seconds
C. every 120 seconds
D. neve
Answer: D
Question: 19
What is a required step when you deploy dynamic VLAN and ACL assignments?
A. Configure the VLAN assignment.
B. Configure the ACL assignment.
C. Configure Cisco IOS Software 802.1X authenticator authorization.
D. Configure the Cisco IOS Software switch for ACL assignment.
Answer: C
Question: 20
Which model does Cisco support in a RADIUS change of authorization implementation?
A. push
B. pull
C. policy
D. security
Answer: A
About the Author: Test Information: Total Questions: 267 Test Number: 300-208 Vendor Name: CISCO Cert Name: CCNP SECURITY Test Name: IMPLEMENTING CISCO SECURE ACCESS SOLUTIONS (SISAS) Official Site:
examcertify.co.uk
For More Details:
examcertify.co.uk/300-208.html
Get20% Immediate Discount on Full Training Material Discount Coupon Code:79741B6012
Source:
isnare.com
Permanent Link:
isnare.com/?aid=1964858&ca=Computers+and+Technology}